The “HD” Heavy Duty Series has been conceived with a robust design to meet most demanding jobsite requirements in terms of reliability, high payload capacity and ease of use.
Reinforced basic frame
Wear protected blades
Single or double rollers with sling bar for the best off road support, completely bolted for an easy maintenance and adjusting
Heavy duty, high torque reducer
High thickness drum and blades
Drum antirebound device
Water tank capacity 800 l (HD7, HD8, HD9, HD10) or 1200 I (HD12+, HD15)
Two washing nozzles (one at ground level by quick joint and one on ladder platform)
Manometer for the concrete consistency
Two zinc-coated additional chutes, with supports for their fixing on counterframe
Special design charging hopper and discharging hopper and chutefor a fast and smooth charging and discharging completely boltedfor a better and simple maintenance
Wear plates on charging hopper and discharging chute
Discharging chute driven by manual cylinder
Adjustable support for hydraulic pump
Water pump driven by reducer
No. 2 quick joint water fillers on front sides of supporting frame
Heavy duty oil cooler with integrated oil tank
Plastic back protection on rear support easy to clean
Two strong armed swivel chute system
Polymer rear mono-axle mudguards with rubber mudflaps
Machine completely sandblasted and painted in rust prevention. Ladder and chute are zinc-coated for better rust resistance
Two man holes on the drum and two safety drum locking systems
 - Copia.jpg&_=26ec1f6c09)
 - Copia.jpg&_=e81fbaf6d9)
.jpg&_=4f8aca8993)
.JPG&_=fd86621aee)
.JPG&_=b5b2104956)
.JPG&_=dc4360fad8)
.JPG&_=5564fc1242)
.JPG&_=571f5584b8)
.JPG&_=4a1890198d)
.JPG&_=e989783a11)
.JPG&_=2f9cae812e)
.JPG&_=54435ace2f)
.jpg&_=34f6eaa2b8)
.JPG&_=ffaf08e211)
.JPG&_=e5eb55f199)
.JPG&_=ef0a206a04)
Configure
Datasheet